PRODUCTS FROM INTERKILN CERAMICS

China Clay
  1. China Clay for Ceramics-Grade I
  2. China Clay for Ceramics-Grade II
  3. China Clay for Paint
  4. China Clay for Rubber & Plastic
  5. Calcined Kaolin
     

CHINA CLAY FOR CERAMICS

High performance water washed china clays for ceramic composition are prepared with utmost care on selection of raw material and controlled process parameters.

These China clay for ceramic Industries are very friendly for ceramic end products with good green strength and white firing.

These clays are tailor made as per users standard specification. Below mentioned specification indicates the range in specification offered by us.

Users are requested to approach us with specific requirements.

(i) GRADE I:

SPECIFICATIONS:

CHEMICAL COMPOSITION:

Sio2 
Al203  
Fe203  
Tio2   
Cao
Mgo  
K20 
L O I      
45 - 48%
36 - 38%
0.5 - 1 %
0.75 - 1.25%
Less than 1%
Less than .5%
Less than .5%
13.0 to 14.5

PHYSICAL PROPERTIES:

Particle size

Less than 2micron 40 - 70
Less than 10micron 80 - 85
Less than 53micron 95 -100

Brightness    75 - 80
M O R          10 - 30

Application: Ceramic Body composition & Fiber Glass mfg.


[ Top ]



(ii) GRADE II:

SPECIFICATIONS:

CHEMICAL COMPOSITION:

Sio2 
Al203  
Fe203  
Tio2   
Cao
Mgo  
K20 
L O I      
2 44 - 47%
37 - 39%
Less than .75%
Less than 1%
Less than 1%
Less than .5%
Less than 1.25%
13.0 to 14.5

PHYSICAL PROPERTIES:

Particle size

Less than   2micron 70 % +5
Less than 10micron 85 % +5
Less than  53micron 95% +5

Brightness      82 - 84 % + 2
M O R            Less than 10


Application: For clays, Electro ceramic, Catalyst,Zeolite mfg.& Marco Granite tiles etc.


[ Top ]



(iii) CHINA CLAY FOR PAINT


High performance water washed Chinaclay for Paint application as an extender are prepared with utmost care on selection of raw material and controlled process parameters.

These clays are tailor made as per users standard specification. Below mentioned specification indicates the range in specification offered by us.

Users are requested to approach us with specific requirements.

SPECIFICATIONS:

CHEMICAL COMPOSITION:

Sio2 
Al203  
Fe203  
Tio2   
Cao
Mgo  
Na20 + K20 
L O I      
2 43 - 47%
37 - 39%
Less than 0.5%
Less than .75%
Less than 1%
Less than .5%
Less than 1.25%
L O I 13.5 to 14.5

PHYSICAL PROPERTIES:

Particle size Less than 2micron 75 %

Brightness        82 - 86 %
Bulk Density     .35 to .7
Specific Surface area 14 to 20
Oil Absorption    35 - 45


[ Top ]

(iv) CHINA CLAY FOR RUBBER & PLASTICS

These clays are derived with water washing technique by detaching the fine coated clay adhered to silica nuclei of the primary ore in complete controlled and process parameters.

These clays are tailor made as per users standard specification.Below mentioned specification indicates the range in specification offered by us .

Users are requested to approach us with their specific requirement.

SPECIFICATIONS:

CHEMICAL COMPOSITION:

Sio2 
Al203  
Fe203  
Tio2   
Cao
Mgo  
K20 
L O I      
44 - 47%
37 - 39%
Less than 0.5%
Less than 1%
Less than .5%
Less than 0.5%
Less than 1.25%
13.5 to 14.5

PHYSICAL PROPERTIES:

Particle size             Less than 2micron 75 %
                               Bulk Density .3 to .6
Specific surface area 15 - 20
Oil Absorption:          30 - 40
Brightness                82 - 84%


[ Top ]


(v). CALCINED KAOLIN.

As per consumers end use requirement, specially processed and properly selected Kaolin is subjected to calcinations.

Calcinations is carried out in controlled temperature condition with required calcinations time and to achieve required properties. The above dehydroxylated Kaolin is further subjected to Micronisation and surface modification with coating and coupling agents.

Calcinations i.e. Thermal activation enhances optical as well as physical and mechanial properties too.

Below mentioned specification indicates the specific range of Calcined Kaolin
developed by us. Users are required to approach us with specific requirement.

SPECIFICATIONS:

CHEMCIAL COMPOSITION:

Sio2 50 to 53%
Al203 43 to 46%
Mixed Oxide 2 - 3%
LOI .5 to 1.5%

PHYSICAL PROPERTIES:

Brightness 86 - 94

Particle size Less than 2micron 70-90
Oil absorption 50-70
Specific surface area 10-25

Bulk Density .4 - .7

NOTE:The above ranged products can also be supplied in surface modified form too.

Suggested Application : Paint, Plastic ,Rubber,Paper & Catalyst Ultra Marine Blue Mfg. etc.
 


[ Top ]